Last updated: November 2026
Dolphin does not need a GameCube BIOS. It starts GameCube games without one, and Wii games never use one. The GameCube BIOS is a single optional file called IPL.bin, which adds the original startup animation, the console’s main menu and the console’s own fonts. If you want it, you dump it from a GameCube you own and place it in a region folder inside Dolphin’s user folder.
This is a researched guide, built from Dolphin’s wiki page on the GameCube Main Menu, its official ripping guide and user directory guide, its source code on GitHub and the libretro documentation for the RetroArch core. File names, folder names, setting names and error messages were checked against the current source. Menus move between versions, so if a name differs on your build, look for the closest match.
This page covers the BIOS question only. For install, graphics and controllers, use the Dolphin emulator setup guide. This site does not link to BIOS or game downloads; everything here assumes a console you own and your own discs, dumped.
Does Dolphin Need a GameCube BIOS?
No. Dolphin’s wiki says the emulator does not include the GameCube Main Menu by default and does not need it, because it launches games straight from its own game list. The BIOS file is optional on every platform Dolphin runs on, and Wii games never load it, because the boot code only runs for GameCube discs.
In Dolphin’s settings the relevant option is Skip Main Menu, and it is on by default. With it on, Dolphin sets up the console state itself and starts the game. With it off, Dolphin boots the real IPL first, which requires the file.
The best GameCube emulator comparison covers the alternatives, and the RetroArch BIOS reference lists the systems that do need files. Two that do: the PS3 BIOS guide and the Xbox BIOS guide for xemu.
What Is the GameCube IPL File?
The IPL is the GameCube’s Initial Program Loader. Dolphin’s wiki describes it as the console’s main menu, commonly known as the GameCube BIOS: the top level interface that loads discs, changes settings and manages memory cards. On the console you reach that menu by holding A on controller 1 while the logo animates.
Dolphin’s source code gives the file details:
| Detail | Value |
|---|---|
| File name | IPL.bin, the same name for every region |
| Size | 2 MiB (2,097,152 bytes), which the source calls the size of the official IPLs |
| Check Dolphin runs | A CRC32 of the file, compared against a list of known dumps |
The CRC32 values Dolphin recognises, as listed in its boot code:
| IPL revision | Console models named in the source | CRC32 |
|---|---|---|
| NTSC Revision 1.0 | DOL-001 (USA), DOL-001 (JPN), DOT-001, SL-GC10 | 6DAC1F2A |
| NTSC Revision 1.1 | DOL-001 (USA), DOL-001 (JPN), DOT-001 | D5E6FEEA |
| NTSC Revision 1.2 | DOL-001 (USA), DOL-001 (JPN) | D235E3F9 |
| NTSC Revision 1.2 | DOL-101 (USA), DOL-101 (JPN) | 86573808 |
| MPAL Revision 1.1 | DOL-002 (BRA) | 667D0B64 |
| PAL Revision 1.0 | DOL-001 (EUR), DOT-001P | 4F319F43 |
| PAL Revision 1.2 | DOL-101 (EUR) | AD1B7F16 |
The source lists the same NTSC revisions for USA and Japanese consoles. A file with a different CRC32 still loads, but Dolphin shows a warning first (see Common Problems).
Where Does IPL.bin Go in Dolphin?
IPL.bin goes in a region folder inside the GC folder of Dolphin’s user folder: GC/USA, GC/EUR or GC/JAP. The file name is the same in all three. When no IPL is present, the hint under the Skip Main Menu setting reads “Put IPL ROMs in User/GC/<region>.”
| Console region | Folder inside the user folder | Menu entry it enables |
|---|---|---|
| North America | GC/USA/IPL.bin | Tools > Load GameCube Main Menu > NTSC-U |
| Europe | GC/EUR/IPL.bin | Tools > Load GameCube Main Menu > PAL |
| Japan | GC/JAP/IPL.bin | Tools > Load GameCube Main Menu > NTSC-J |
Dolphin reads the folder that matches the region of the game being started. The user folder itself depends on the platform; on desktop builds, File > Open User Folder opens it.
| Platform | Default user folder |
|---|---|
| Windows | %AppData%\Dolphin Emulator, or Dolphin Emulator inside Documents if that older folder already existed |
| Linux | ~/.local/share/dolphin-emu, or ~/.dolphin-emu if that folder exists |
| macOS | ~/Library/Application Support/Dolphin |
| Android | Android/data/org.dolphinemu.dolphinemu/files on shared storage |
| RetroArch core | RETROARCH_SAVES_FOLDER/dolphin-emu/User |
Dolphin’s user directory guide warns that the Android folder is difficult to reach in most file managers on Android 11 and newer.
What Does the GameCube BIOS Change in Dolphin?
It changes three things: the boot animation, access to the console’s main menu, and fonts. With an IPL in place and Skip Main Menu turned off, GameCube games start with the original logo animation. The Tools menu can boot the main menu by itself, and Dolphin loads the console’s fonts from the dump.
Boot animation and menu. To play the animation before each game on a desktop build:
- Place
IPL.binin the region folder that matches your games. - Open Config and select the GameCube tab.
- Untick Skip Main Menu under IPL Settings.
- Start a GameCube game from the same region as the IPL.
- Hold A while the logo animates if you want the main menu instead of the game.
On Android the same setting is under Settings > Config > GameCube. To open the menu with no game on desktop, use Tools > Load GameCube Main Menu and pick the region; an entry is only available when that region’s file exists.
Fonts. Dolphin’s source explains that the official IPL fonts are copyrighted, so Dolphin ships free replacements. The replacements have different padding, which the source says causes misplaced text in some titles. When an IPL dump is present in a region folder, Dolphin loads the fonts from the dump instead.
Does the RetroArch Dolphin Core Need a BIOS?
No. The libretro documentation calls the BIOS optional for the Dolphin core and gives the same file name, IPL.bin, for all regions. The folder differs from standalone Dolphin: RETROARCH_SAVES_FOLDER/dolphin-emu/User/GC/ followed by USA, EUR or JAP, which puts it inside RetroArch’s saves folder, not its system folder.
The libretro docs add that a BIOS is not necessary for most games, but that certain titles which make heavy use of the system fonts, with Star Fox Assault as their example, can be unplayable without it.
To play the boot animation in the core, the libretro docs say to open Dolphin.ini in RETROARCH_SAVES_FOLDER/dolphin-emu/User/GameSettings/Config/ with a text editor and change SkipIPL = True to SkipIPL = False.
How Do You Dump the GameCube BIOS From Your Own Console?
You copy it off a GameCube that can run homebrew, using Swiss. Dolphin’s official ripping guide describes this route under “GameCube IPL via Swiss”: with Swiss running through PicoBoot, an SD Media Launcher or another method, the console exposes its IPL as a file named ipl.bin that you copy to removable media.
The steps, from Dolphin’s guide, assuming Swiss is already running:
- Press B, move to the cog at the bottom of the screen and press A.
- Set File Management to yes on the first page of settings.
- Go back to devices and open System.
- Scroll to
ipl.bin, press Z to manage the file, then X to start a copy. - Choose the device to copy to. For PicoBoot, the guide says this is usually SD Card - SD2SP2.
- Move the file to your computer and rename it
IPL.bin. - Place it in the region folder for your console.
The same guide covers dumping your own game discs. To play those dumps on a real Wii, see the Wii USB loader setup guide.
Common Problems
“The IPL file is not a known good dump. (CRC32: …)” Dolphin computed a CRC32 that is not on its list. Dump the file again and compare the size with 2,097,152 bytes.
“PAL IPL found in USA directory.” (or the NTSC and EUR equivalent), followed by a warning about disc recognition. The file is in the wrong region folder. PAL dumps belong in EUR.
“Cannot start the game, because the GC IPL could not be found.” Skip Main Menu is off and there is no IPL.bin in the folder for that game’s region. Add the file or turn Skip Main Menu back on.
“The disc could not be read” inside the GameCube menu. Dolphin’s wiki says the menu has a regional lockout, so this appears when the disc and the IPL are from different regions.
Skip Main Menu cannot be unticked. Dolphin found no IPL.bin in USA, JAP or EUR. Check the file name and folder.
The menu hangs after Change Disc. The wiki documents a disc swapping hang with certain combinations of discs and says it does not occur with the Interpreter CPU engine.
Does a Handheld Need the BIOS?
No. Dolphin’s Android app treats the IPL the same way as the desktop builds: optional, in the same region folders, with the same Skip Main Menu setting. Choosing hardware for GameCube is a separate question, and best handheld for GameCube emulation ranks the options.
FAQ
Is there a Wii BIOS for Dolphin?
No. Dolphin only loads the IPL when it starts a GameCube disc. A comment in its source notes that the Wii does not have a copy of the IPL, only fonts.
What is the GameCube BIOS file called?
IPL.bin, for every region. Swiss names the dumped file ipl.bin, so rename it to match.
Can a USA IPL be used for Japanese games?
Dolphin’s source lists the same NTSC revisions for USA and Japanese consoles, but it reads the file from the folder for the game’s region, so a Japanese game looks in GC/JAP.
Why does Dolphin say the IPL is not a known good dump?
Its CRC32 does not match any of the seven console revisions, or the Triforce arcade IPL, on Dolphin’s list.
Where is Skip Main Menu in Dolphin?
On desktop, under Config > GameCube > IPL Settings. On Android, under Settings > Config > GameCube. It is on by default.
Dolphin wiki: GameCube Main Menu | Dolphin ripping guide | Dolphin user directory guide | Dolphin source on GitHub | Dolphin core docs (libretro)
Last verified: November 2026