Last updated: November 2026
The “PS3 BIOS” that RPCS3 and RPCSX ask for is not a chip dump. It is the PS3 system software update, one file named PS3UPDAT.PUP, and Sony offers it as a download on its own PlayStation support site. The current version is 4.93. Download it from Sony, then install it from inside the emulator: File > Install Firmware in RPCS3 on PC and Steam Deck, or the Firmware: None entry in the RPCSX menu on Android. The emulator unpacks it into a folder called dev_flash. Nothing is copied by hand.
This is a researched guide, built from Sony’s PS3 system software page, the RPCS3 source code and the RPCSX source code on GitHub (Android app, emulator core). Menu names, folder paths and error messages are quoted from that source code as it stood in November 2026. Both projects change often, so if a name differs on your build, look for the closest match.
This page covers the firmware file only. For the rest of the setup, see the RPCS3 setup guide and the RPCSX Android setup guide. Games are your own discs, dumped. This site does not link to game or firmware downloads other than Sony’s official page.
What Is the PS3 BIOS File?
The PS3 BIOS file is PS3UPDAT.PUP, the PlayStation 3 system software update that Sony publishes for the console. RPCS3’s own missing-firmware message says commercial games require “the firmware (PS3UPDAT.PUP file) to be installed”. RPCSX on Android asks for the same file, so “PS3 BIOS”, “PS3 firmware” and “RPCS3 firmware” all mean this one download.
| Detail | Value | Source |
|---|---|---|
| File name | PS3UPDAT.PUP | Sony’s page |
| Current version | 4.93 | Sony’s page, and the RPCS3 installer’s own “newest firmware version” |
| Size of the 4.93 file | 206,197,916 bytes | The size Sony’s download server reports for the file |
| Free space Sony asks for | 200MB | Sony’s page |
That size is about 197 MB the way Windows counts it (1,048,576 bytes per MB).
This is different from the older PlayStations, where the BIOS is a small file dumped from a console. Those are covered in the PS1 BIOS and PS2 BIOS guides, and RetroArch cores in the RetroArch BIOS reference. For other consoles of that era, see the Xbox BIOS guide for xemu and the GameCube BIOS guide.
Where Do You Download the PS3 Firmware Officially?
Download it from Sony’s PlayStation PS3 system software page, under “Update using a computer”. That section has a “Download PS3 Update” link that points at PS3UPDAT.PUP on Sony’s own update server. It is the same file Sony tells PS3 owners to copy to a USB drive, and it is the only source this guide recommends.
- Open the PlayStation PS3 system software page.
- Scroll to Update using a computer.
- Right click Download PS3 Update and choose “save as”, which is how Sony’s page says to start the download.
- Keep the file name as
PS3UPDAT.PUP. - Save it anywhere you can find again. Sony’s
PS3andUPDATEUSB folders are for a real console, not for an emulator.
Sony’s page warns console owners not to update with data from any other source, and the same caution applies to emulators. RPCSX’s own README tells users not to ask for links to games or system files.
How Do You Verify PS3UPDAT.PUP?
Check the version and size against Sony, then let the emulator do the rest. Sony’s page does not publish a checksum for the file. RPCS3 and RPCSX both validate the file’s internal hashes before installing anything, and RPCS3 also checks that the file is as long as its own header says it should be.
For version 4.93, the file Sony’s server sends is 206,197,916 bytes. To read the size of your copy:
(Get-Item .\PS3UPDAT.PUP).Length
stat -c %s PS3UPDAT.PUP
A smaller number means the download was cut off. A different number can also mean Sony has released a newer version, so compare the version at the top of Sony’s page with the 4.93 this guide was written against.
The RPCS3 installer then runs its own checks, in this order in its source: the PUP signature at the start of the file, the file’s length against its header, each entry against the hash table stored inside the PUP, and the version against 4.93. If the install completes, the file passed all of them. The message for each failure is in Common Problems below.
How Do You Install PS3 Firmware in RPCS3?
In RPCS3, open File > Install Firmware, select PS3UPDAT.PUP, and wait for the RPCS3 Firmware Installer to finish. RPCS3 extracts the firmware into its dev_flash folder and then builds a firmware cache. The steps are the same on Windows, Linux, macOS and the Steam Deck in Desktop Mode.
- Open RPCS3 and click File > Install Firmware.
- Pick your file in the Select PS3UPDAT.PUP To Install window.
- Answer Yes if RPCS3 says a firmware version “has already been installed” and asks to overwrite it.
- Wait for the RPCS3 Firmware Installer progress window to finish.
- Look for the message “Successfully installed PS3 firmware and LLE Modules!”.
- Let RPCS3 finish creating the firmware cache that starts right after.
Two other ways in, from the same source code: dropping the .PUP file onto the RPCS3 window brings up an “Install firmware” prompt, and a “Missing Firmware Detected!” box has a Locate PS3UPDAT.PUP button.
The cache can be rebuilt later from File > Firmware > Create Firmware Cache.
How Do You Install PS3 Firmware in RPCSX on Android?
In RPCSX, open the menu from the top bar, tap Firmware: None and choose PS3UPDAT.PUP in the file picker. The entry shows a progress circle while the install runs, then changes to the installed version number. RPCSX will not start a game until this has finished.
- Copy
PS3UPDAT.PUPto the phone or handheld. - Open RPCSX and tap the menu button in the top bar.
- Tap Firmware: None, the first entry in the menu.
- Select
PS3UPDAT.PUPin the Android file picker. - Wait while the progress circle next to the entry fills. The task is labelled Firmware Installation.
- Check that the entry now reads Firmware: followed by the version.
After the files are installed, RPCSX queues the firmware for compiling, so the device stays busy for a while longer.
The Android app’s README lists Android 10 or newer as its only requirement. The rest of the setup is in the RPCSX Android setup guide.
Where Does the PS3 Firmware Go After Install?
The firmware is unpacked into a folder named dev_flash inside the emulator’s data folder. You never place PS3UPDAT.PUP there yourself; the installer extracts the firmware packages into it. By default the locations below apply, taken from the RPCS3 and RPCSX source code.
| Platform | Default dev_flash location |
|---|---|
| Windows (RPCS3) | dev_flash\ inside the folder RPCS3 runs from |
| Linux, including the AppImage on a Steam Deck (RPCS3) | ~/.config/rpcs3/dev_flash/, or $XDG_CONFIG_HOME/rpcs3/dev_flash/ when that variable is set |
| macOS (RPCS3) | ~/Library/Application Support/rpcs3/dev_flash/ |
| Android (RPCSX) | config/dev_flash/ inside the RPCSX app’s external files folder (package name net.rpcsx) |
Three things can move it on RPCS3: a folder named portable next to the RPCS3 executable, the RPCS3_CONFIG_DIR environment variable on Windows, and the dev_flash path in RPCS3’s virtual file system settings (Manage > Virtual File System).
RPCS3 reads the installed version from dev_flash/vsh/etc/version.txt. On Android, RPCSX has a View Internal Directory option in its settings, described as “Open internal directory of RPCSX in file manager”, which is the quick way to reach its folder.
Common Problems
Every message below is quoted from the RPCS3 or RPCSX source code.
| Message | Where | What it means |
|---|---|---|
| “Missing Firmware Detected!” | RPCS3 | No firmware is installed. Click Locate PS3UPDAT.PUP and select the file. |
| “Firmware installation failed: The provided file is not a PUP file.” | RPCS3 | The file is something else, such as a web page saved under the wrong name. Download it again from Sony. |
| “Firmware installation failed: The provided file is incomplete. Try redownloading it.” | RPCS3 | The file is shorter than its header says. The download was cut off. |
| “Firmware installation failed: The provided file’s contents are corrupted.” | RPCS3 | The internal hash check failed, or expected data is missing. Download it again from Sony. |
| “Firmware installation failed: Out of disk space.” | RPCS3 | The drive that holds dev_flash does not have room for the extracted firmware. |
| “The firmware contents could not be extracted.” | RPCS3 | RPCS3’s message blames antivirus interference and says to add RPCS3 to the antivirus whitelist. |
| “Old firmware detected.” | RPCS3 | The file is older than 4.93. Get the current one from Sony. |
| “Missing Firmware”, “Please install the required firmware to continue.” | RPCSX | A game was tapped before any firmware was installed. |
| “Please wait until firmware installs successfully to continue.” | RPCSX | A game was tapped while the firmware install was still running. |
| “Selected file is not firmware update file” | RPCSX | The file failed the hash check. Pick the real PS3UPDAT.PUP. |
| “Firmware update file is broken” | RPCSX | The file is damaged or incomplete. Download it again from Sony. |
FAQ
Is the PS3 BIOS the same thing as PS3 firmware?
Yes. RPCS3 and RPCSX call it firmware, and the file is Sony’s PS3UPDAT.PUP system software update. There is no separate BIOS file to find.
What is the latest PS3 firmware version?
4.93, according to Sony’s PS3 system software page in November 2026. The RPCS3 installer names the same version as the newest.
Do you need a PS3 to get the firmware?
No. Sony’s page offers the update as a computer download. Games are a different matter: those are your own discs, dumped, as the RPCS3 setup guide explains.
Does RPCSX on Android use the same file as RPCS3?
Yes. Both installers read the same PUP format and extract the same dev_flash packages from it, so one download from Sony serves both.
How do you check which firmware version is installed?
RPCS3 tells you during a reinstall: it says which version “has already been installed” before overwriting. RPCSX shows the version in its menu, in place of Firmware: None.
PS3 system software (Sony) | RPCS3 source | RPCSX Android app source | RPCSX source
Last verified: November 2026